The bool-file interface
bool-file interface allows access to a specific class of file that contains boolean semantics, typically used to toggle or represent the state of binary hardware values.
This interface is primarily intended to be used with Ubuntu Core devices, it’s also restricted because it provides privileged access to hardware.
These kinds of file are located within specific directories inside the sysfs filesystem (
/sys) and this interface allows a file to be read, to obtaining a current value, or written to, setting a new value.
The LED class is a good example of file type for this interface, as it potentially allows LEDs to be turned on and off, and have their brightness modified.
snap interface bool-file command to see which boolean files are available on the system:
$ snap interface bool-file name: bool-file summary: allows access to specific file with bool semantics slots: - my-gadget:green-led - my-gadget:red-led [...]
path(slot): path to the file in sysfs
The path value must match one of the following regular expressions:
- For GPIO devices:
- For LED devices:
- For GPIO devices:
The gpio interface provides another option for accessing GPIO devices.
Unless a snap specifically expects a set of boolean files that cannot be predefined, the recommended approach is to define distinct plugs for each boolean file the snap wishes to use:
plugs: green-led: interface: bool-file red-led: interface: bool-file
Defining distinct plugs for each boolean file has the advantage of being self-documenting, and 1:1 connections like these are easier to track and setup with auto-connections, if needed.
Once connected, the consuming snap can use the boolean file via the path mentioned in the
path attribute specified by the connected slot.
The slot side on a gadget snap may be declared as follows:
slots: green-led: interface: bool-file path: /sys/class/leds/green0/brightness red-led: interface: bool-file path: /sys/class/leds/red0/brightness
The test code for this interface can be found in the snapd repository:
The source code for the interface is in the snapd repository:
Last updated 1 year, 7 months ago.