OpenCorsairLink

OpenCorsairLink

Graham Morrison (degville) Publisher

Install latest/stable of OpenCorsairLink

Ubuntu 16.04 or later?

Make sure snap support is enabled in your Desktop store.

Install using the command line

sudo snap install opencorsairlink

Don't have snapd? Get set up for snaps.

Channel Version Published

A status and control utility that iteracts with CorsairLink products

OpenCorsairLink is a command-line tool to monitor and control the fan speed, LED colour and pump volumes of specific Corsair power supplies and cooling solutions.

To allow this snap access to your device(s), issue the following connection commands:

 $ sudo snap connect opencorsairlink:raw-usb
 $ sudo snap connect opencorsairlink:hardware-observe

Examples:

To set your own custom fan curve for a specific set of temperatures, use the following command:

 $ sudo opencorsairlink --device 1 --fan channel=1,mode=6,temps=0:35:45:50:55:60,speeds=0:0:55:60:75:100

To set LED colors and mode:

 $ sudo opencorsairlink --device 0 --led channel=0,mode=0,colors=00FF00

To set pump cooling mode:

 $ sudo opencorsairlink --device 0 --pump mode=5

OpenCorsairLink is unofficial and is not endorsed or affiliated with Corsair.

General options:

  • --help: prints this message
  • --version: displays version
  • --debug: displays enhanced Debug Messages
  • --dump: implies --debug, dumps the raw data received from the device.
  • --machine: prints status in a machine readable format
  • --device <Device Number> : specify selected device
  • --led: control LED modes alongside standard, error and warning colors

----fan: set fan mode and create speed profiles ---pump: set pump cooling mode

LED (--led) options: (after specifying a device):

channel=N,mode=N,colors=HHHHHH:HHHHHH:HHHHHH,temps=TEMP:TEMP:TEMP

  • channel= <led number> : selects LED channel to configure. Accepted values are 1 or 2.
  • mode=:
    • 0: static
    • 1: blink (Only Commander Pro and Asetek Pro)
    • 2: color Pulse (Only Commander Pro and Asetek Pro)
    • 3: color Shift (Only Commander Pro and Asetek Pro)
    • 4: rainbow (Only Commander Pro and Asetek Pro)
    • 5: temperature (Only Commander Pro, Asetek, and Asetek Pro)
  • Colors: <HTML Color Code>, defines the LED color
  • Warn: <HTML Color Code>, defined the warning LED color
  • Temps: <Temperature in Celsius>, defines the warning temperature LED color

Fan (--fan) options: (after specifying a device):

channel=N,mode=N,pwm=PWM,rpm=RPM,temps=TEMP:TEMP:TEMP,speeds=SPEED:SPEED:SPEED

  • channel= <fan number>: selects a fan to setup. Accepted values are 1, 2, 3 or 4.

-mode=:

  • 0: fixed PWM (requires the PWM to be specified)
  • 1: fixed RPM (requires the RPM to be specified)
  • 2: default
  • 3: quiet
  • 4: balanced
  • 5: performance
  • 6: custom Curve
  • PWM <PWM Percent>: the desired PWM for the selected fan. NOTE: only with fixed PWM
  • RPM <fan RPM>: the desired RPM for the selected fan. NOTE: with fixed RPM
  • For Custom Curves:
    • Temps <C>: define Celcius temperatures for fan
    • Speeds <Percentage>: define RPM percentages for fan

Pump (--pump) options: (after specifying a device): -mode=:

  • 0: quiet
  • 1: balanced
  • 2: performance

Without options, OpenCorsairLink will show the status of any detected Corsair Link device.

Details for OpenCorsairLink

License
  • GPL-2.0+
Last updated
  • 6 April 2020 - latest/stable
  • 13 October 2021 - latest/edge
Websites
Contact

Share this snap

Generate an embeddable card to be shared on external websites.

Install OpenCorsairLink on your Linux distribution

Choose your Linux distribution to get detailed installation instructions. If yours is not shown, get more details on the installing snapd documentation.

Arch Linux

CentOS

Debian

elementary OS

Fedora

KDE Neon

Kubuntu

Manjaro

Pop!_OS

openSUSE

Red Hat Enterprise Linux

Ubuntu

Raspberry Pi

Where people are using OpenCorsairLink

Users by distribution (log)

Ubuntu 22.04
Ubuntu 20.04
Ubuntu 23.10
Ubuntu 18.04
Manjaro
Linux Mint 21.3
pop 22.04
Debian 12
Zorin OS 17

Is there a problem with OpenCorsairLink? Report this app